Can't choose the car which was configured

When the car which you want to use is not selectable upon joining the server, then usually the car has been set in the server_cfg.ini but not in entry_list.ini or vice versa.

For example you set: CARS=bmw_m3_e30;ruf_yellowbird in the server_cfg.ini
Then the entry_list.cfg needs to have the exact same cars, for example:
[CAR_0]
MODEL=bmw_m3_e30
SKIN=Brilliant_red
SPECTATOR_MODE=0
DRIVERNAME=
TEAM=
GUID=
BALLAST=0

[CAR_1]
MODEL=ruf_yellowbird
SKIN=1-Yellowbird-black
SPECTATOR_MODE=0
DRIVERNAME=
TEAM=
GUID=
BALLAST=0

Note: If you set the MAX_CLIENTS in the server_cfg.ini to something low (for example 1) and the custom car is in a higher number in the entry_list.ini (for example [CAR_1] ) then the custom car is not selectable.
In the above example this would mean only the BMW M3 E30 is selectable, but the RUF Yellowbird is not.

  • 4 Benutzer fanden dies hilfreich
War diese Antwort hilfreich?

Verwandte Artikel

Can't join server

If you can't join your Assetto Corsa server please do the following:  Make sure you're using...

server is running a different protocol error

When you receive an error such as "WARNING: requested to join with a different protocol...

How to set server in non-booking mode

To set your server in non-booking server, follow this instructions: Go to your control panel...

Configuring booking mode

1. First change: PICKUP_MODE_ENABLED=1 to PICKUP_MODE_ENABLED=02. After the section...

How to use welcome messages?

You can set a welcome message which is send to players when the join the server. For example to...