Cars don't move

When the cars in the server don't move try adjusting the dynamic track settings in the server.cfg file.

The following settings should work:
[DYNAMIC_TRACK]
SESSION_START=95
RANDOMNESS=2
SESSION_TRANSFER=90
LAP_GAIN=10

Please restart the server after changing the above settings and see if the cars move correctly.


If they still don't move you may want to adjust the following settings:
In the entry list.cfg file, set for each vehicle:
BALLAST=0

In the server.cfg set the following:
MAX_BALLAST_KG=0
LEGAL_TYRES=V;E;HR;ST

LOOP_MODE=1
ALLOWED_TYRES_OUT=2
DAMAGE_MULTIPLIER=100
FUEL_RATE=100
TYRE_WEAR_RATE=100

  • 3 Users Found This Useful
Was this answer helpful?

Related Articles

Can't join server

If you can't join your Assetto Corsa server please do the following:  Make sure you're using...

server is running a different protocol error

When you receive an error such as "WARNING: requested to join with a different protocol...

Can't choose the car which was configured

When the car which you want to use is not selectable upon joining the server, then usually the...

Server Contains Unavailable Content Error

This error indicates that the content (a track or car) which is configured on the server is not...

wsarecv: An existing connection was forcibly closed by the remote host.

When you receive an error such as: "read tcp 85.17.189.120:11757->255.255.255.255:51988:...